Component EXD

Which Component EXD products are right for your application? Contact our Sales and Technical Service department and get the answers.

Certifications and Listings

Select a LOCKING DEVICE (one per door)

  • Determine type of mounting - Direct, Bracket or Shear
  • Determine holding force required - 600 lbs to 1,800 lbs
  • Choose from the following products: M32, M34R, M38M62M68M82 or SAM

Choose an INITIATE DEVICE (one per door)

  • Determine type of egress - Egress Control Only or Egress Control with Electronic Access Capability
  • Determine door type - Fire Rated or Non-Fire Rated
  • Choose from the following products: Securitron SB-MXD, LML, LMS, DSB, TSB, TSH, EMB; Sargent® 80 Series with 55 prefix; Adams Rite 3700360033003100

Choose an EXIT DELAY TIMER (one per opening)

  • Choose from the following products: XDT, BA-XDT, FA-XDT 
  • If XDT is chosen, a sounder must be installed
  • If BA-XDT or FA-XDT is chosen, a Sonalert and exit sticker are included
  • More than one door requires purchases of additional EXD-1L Door Label

Choose a SYSTEM RESET (one per opening)

  • Determine required reset method - Manual (NBC of Canada, NFPA 101 & UBC) or Automatic (UBC & BOCA)
  • Choose from the following products: MK Series with momentary switch for Manual Reset or DPS-W and DPS-M for Automatic Reset

Choose a POWER SOURCE (one per building)

  • Component EXD is based on a single power supply
  • Different sizes are available depending on the number of doors
  • Choose from AQ, BPS or BPSM Series